25 Teeth Sprocket 1/4" Pitch, 20mm Bore Carbon Steel with Set Screws

Description

Document
Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: C45 carbon steelFinish: Black OxideNumber of Teeth: 25Outside Diameter: 54mm / 2.13-inchBump Width: 12mm / 0.47-inchTotal Width: 15mm / 0.59-inchBore Diameter: 20mm / 0.79-inchPitch: 1/4-inch / 6.35mmTooth Width: 2.7mm / 0.11-inchSet Screw Size: M5Package Content: 1 x Chain Sprocket2 x Set Screws
Idler Sprocket, 10mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Bearing
USD
19.97
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Bearing
USD
16.65
34 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel
USD
53.6
14 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel
USD
12.8
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel w 2 Insert Bearing
USD
20.65
Idler Sprocket, 6mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing
USD
18.97
25 Teeth Sprocket 1/4" Pitch, 20mm Bore Carbon Steel with Set Screws
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 25
Outside Diameter: 54mm / 2.13-inch
Bump Width: 12mm / 0.47-inch
Total Width: 15mm / 0.59-inch
Bore Diameter: 20mm / 0.79-inch
Pitch: 1/4-inch / 6.35mm
Tooth Width: 2.7mm / 0.11-inch
Set Screw Size: M5
Package Content:
1 x Chain Sprocket
2 x Set Screws
Hot Item
9 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with Set Screws
USD 9.32
18 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with Set Screws
USD 13.76
20 Teeth Sprocket 1/4" Pitch 12mm Bore Carbon Steel 5x2.3mm Keyway w Set Screws
USD 15.23
14 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel
USD 8.1
24 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel
USD 14.45
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
25 Teeth Sprocket 1/4" Pitch, 20mm Bore Carbon Steel with Set Screws
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 25
Outside Diameter: 54mm / 2.13-inch
Bump Width: 12mm / 0.47-inch
Total Width: 15mm / 0.59-inch
Bore Diameter: 20mm / 0.79-inch
Pitch: 1/4-inch / 6.35mm
Tooth Width: 2.7mm / 0.11-inch
Set Screw Size: M5
Package Content:
1 x Chain Sprocket
2 x Set Screws
Idler Sprocket, 10mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Bearing
USD
19.97
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Bearing
USD
16.65
34 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel
USD
53.6
14 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel
USD
12.8
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel w 2 Insert Bearing
USD
20.65
Idler Sprocket, 6mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing
USD
18.97
Hot Item
9 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with Set Screws
USD 9.32
18 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with Set Screws
USD 13.76
20 Teeth Sprocket 1/4" Pitch 12mm Bore Carbon Steel 5x2.3mm Keyway w Set Screws
USD 15.23
14 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel
USD 8.1
24 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel
USD 14.45
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Jul 11, 2022 at 18:45:34 PDT, seller added the following information: